Hello.
I have trouble with a connection between my new G4/400 running 9.0.4
and an old Apple Color OneScanner 1200/30.
I added a SCSI card (Adaptec 2906) to the G4 to use with the scanner
and the APS tape backup (w/retrospect) we use here. SCSI scans show
the scanner and tape drive. The tape works fine.
Apple's Tech Support pages says that I should be using Scanner
extension 4.3. But when I do, it won't load (starts up with red X).
When I use Scanner v4.2 (which the site says is only for use with
original b&w Scanner) it loads fine, but when I attempt to scan, I
get a message that says the scanner isn't attached, carriage may be
locked or if a feeder is attached (it isn't) there may be a paper jam
(-30002). Can't get around this message!
I know this is pretty specific to my configuration, but if anyone has
any other suggestions I can try, please pass them on.
I wanted to use the Apple Tech Exchange (never have before) but from
what I see, it is read only for another month while they change
formats for this site.
Thanks in advance for any help.
-- ------------------------------ Michael Rimar Administrative Assistant UC Botanical Garden 200 Centennial Drive Berkeley, CA 94720-5045 (510) 642-0849 fax (510) 642-3012 ------------------------------------------------------------------------------------------------------ The following was automatically added to this message by the list server:
For information about MAGNet, its meetings and events, and its mailing list, including information on subscribing and unsubscribing, see the MAGNet Web site at <URL:http://mac.berkeley.edu/help/magnet/>.
This archive was generated by hypermail 2b29 : Thu Sep 21 2000 - 08:33:22 PDT